Product description
Ager is a solvent-based color enhancer impregnator sealer suitable for marble, travertine, stone, granite and quartz agglomerates, when you want to obtain the "wet" effect for both indoor and outdoor use. It is advisable to apply the product on raw, sandblasted, brushed, flamed or polished surfaces to obtain a long-lasting wet effect. The product gives excellent properties of hydro and oil repellency to the treated surfaces and does not yellow in the sun. Ager, in fact, penetrates and fixes itself in the microporosity of the material providing the permanent wet effect. It also gives a good anti-graffiti power.
The product must be evenly applied on dry and clean materials. The presence of water, dust o dirty matter may influence the result regarding the uniformity of the surface. We suggest to spread the product using a brush, cloth, sponge or through a gun spray. Use the right quantity that the material naturally can absorb. Then, after few seconds, clean (buff) the surfaces by a cleaned cloth. Any excess of Ager creates superficial glossy and sticky films, so the excess must be removed immediately after the application. We suggest to repeat this treatment after 10-15 minutes from the first application. The effect of anti-stain will be achieved after 24 hours from the treatment. In case of floor application, do not walk on the surface before. IMPORTANT: When a surface is treated for the first time, it is good to evaluate its effect on a sample or on a hidden corner. Close the container after use.
The product will last at least 24 mouths in normal condition (between 5-30°C), kept away from source of heat, humidity and sun light. Close the package after usage. Protect the product against freezing temperatures.
Ager is a chemical product. Please read the safety data sheet before usage and the rules written on the label on the tins/drums.
Documents
