Product description
Moeller HMK S232 Stain Stopper is a protective agent (impregnating agent) without solvents. It is easy to use and ready to use.
The Moeller HMK S232 reduces the penetration of water, dirt and oil into various types of surfaces. It provides protection for natural stone floors (soft and hard stones), marble composite, artificial stone, concrete, cotto, brick tile, clay tile and clinker floors. The S232 can be used both indoors and outdoors.
How do you use the HMK S232 Stain Stop?
If there is underfloor heating, switch it off and then let the surface cool to its natural temperature. For best results, the surface must be thoroughly clean. So clean the surface thoroughly and let it dry (max residual moisture content 6-8%). When the surface is dry, apply the Moeller S232 Stain Stopper generously but evenly to the absorbent surface with a soft brush or a roller with short bristles. Treat highly absorbent surfaces again after approximately 20 minutes.
Remove excess Moeller HMK S232 completely with a squeegee, cloths or tissue paper before drying. Moeller HMK S232 can also be sprayed outdoors onto the material to be treated (airless). After treatment, the residue can be removed after 12 hours by cleaning (scrubbing) the surface with water. The drying time depends on temperature and air circulation, approximately 4-6 hours. Do not step on the surface during this time. The effectiveness of the product develops in 48 hours.
Consumption of HMK S232 Stain Stop.
Depending on the absorbency of the substrate, the consumption of the S232 is approximately 4 to 20 m2 per liter.
Documents
