Moeller HMK P319 Marble and Granite Polish - 1L

HMK P319 Marble and Granite Polish is a protective and caring emulsion with wax (concentrate) for finely ground and polished floors made of natural and artificial stone, e.g. marble, limestone, granite, gneiss, marble composite, concrete stone and similar floors. The product gives the floor a radiant shine after rubbing. Reduces the penetration of water and dirt. When used regularly, P319 reduces traces caused by use and foot traffic on the floor.



Caring emulsion for all finely ground and polished natural stone and artificial stone surfaces.

Long lasting.

Provides the floor a radiant shine.

Prevents the ingress of water and dirt.

Suitable for indoor use.

How do you use the Moeller HMK P319?

Always read the label on the packaging carefully beforehand. Only use the Moeller HMK P319 Marble and Granite Polish on a clean and dry surface. To properly clean the surface, we recommend using Moeller HMK R155.



For the best result and correct drying process, any underfloor heating should be switched off. A floor must be so-called natural stone cold. Before use, shake the packaging of the Moeller HMK P319 Marble and Granite Polish well so that the substances are properly loosened and distributed. Apply HMK P319 Marble and Granite Polish diluted with warm water 1:5 to 1:20 thinly and evenly with a soft cloth or flat mop. Before it is completely dry, rub with a soft cloth or mechanically with a felt disc, red or beige pad. To maintain shine, HMK P319 Marble and Granite Polish can be added to the mop water in a ratio of 1:50. Treat large surfaces in sections. To prevent footsteps, do not walk on the floor afterwards during the drying process.



Retain the shine on the natural stone floor.

For a nice result, the Moeller HMK P319 can be used in combination with the Moeller HMK P324. After every 5 treatments with Moeller HMK P324 Noble Soap, treat the floor once with Moeller HMK P319. If thorough cleaning is required over time, we recommend using the Moeller HMK R155.



Consumption of the P319

In general, the following can be used for approximately 10 to 20m2 with concentrated product. Mixed with warm water up to 150 m2 per liter.