Lithofin Graffiti Remover - 500ml

Lithofin Graffiti Remover is a special product from the Lithofin range; this combined cleaner, based on mild alkaline components and solvents, has been specially developed for removing graffiti.

What is this product suitable for?

For removing graffiti and similar types of contamination from walls and facades. Lithofin Graffiti Remover dries slowly, allowing for a long contact time. Traces of spray paint or marker ink can be effectively and thoroughly removed. Once dissolved, residues can be washed off with water. Lithofin Graffiti Remover also removes greasy dirt, soot, and other similar contaminants.

On which surfaces can you use this graffiti remover?

For removing graffiti and similar soiling on walls and facades. Suitable for various surfaces such as ceramic, brick, natural stone, concrete, reconstructed stone, plaster, glass, and metal. For both indoor and outdoor use.

Do not use on rubber, freshly painted surfaces, synthetic materials, wood, acrylic glass, aluminum, or other anodized or sensitive surfaces. To ensure compatibility, always test the product first on an inconspicuous area.

How do you use this graffiti remover?

First, test on an inconspicuous area. Turn the nozzle of the spray gun to “Spray.” Use only on dry surfaces. Spray directly onto the graffiti and close the nozzle afterwards. Scrub rough surfaces with a brush. Allow it to work, but do not let the product dry. Once the paint has dissolved, rinse with water and brush off. For stubborn cases (e.g., old paint), repeat the process, allow a longer dwell time if needed, and brush again. The newer the graffiti, the easier it is to remove. Instead of using a brush, a pressure washer may also be used on suitable surfaces.



Attention! Do not use the product on rubber, freshly painted surfaces, synthetic materials, wood, acrylic glass, aluminum, or other anodized and sensitive surfaces. Always perform a test in an inconspicuous area before use. The surface temperature during treatment should be between 10°C and 25°C.

How much surface can I treat?

Depending on the surface and the amount of graffiti, the consumption is approximately 15 m² per liter. This spray contains 500 ml, which is sufficient to treat about 7.5 m² of surface area.