Product description
Lithofin MN Wash & Clean is a cleaning product for regular use on all types of stones. It is a special product from the Lithofin MN range for cleaning marble, natural stone and concrete, among others. Wash & Clean is an alkaline cleaning concentrate based on high-quality natural soaps and special cleaning and maintenance components. This product cleans the stone and has the advantage that it also cares for the stone. With regular use, the floor becomes more beautiful and fuller in color and structure.
What does the Wash & Clean do?
Lithofin MN Wash & Clean contains active substances that loosen dirt from the surface and keep it there during cleaning. This has the advantage that the dirt can be easily removed from the surface. The remaining thin film is free of wax, so no layers or streaks are left behind. Wash & Clean also ensures that the floor will look better with regular use. The beautiful color and structure of the natural stone are better emphasized. This cleaning product has the advantage that it leaves a pleasant scent and no chemical odor.
This Lithofin product can be used on all stone surfaces such as a floor, wall, table top and windowsill. However, for use on table tops, windowsills and countertops, we recommend using Lithofin Easy-Clean. The Lithofin Easy-Clean bottle has a handy spray cap, making it easy to use.
Use of Wash & Clean
Always add Lithofin MN Wash & Clean to the mop water. A dash of approximately 20 grams per bucket of lukewarm water is sufficient. Use a little more during the first treatment, on porous or heavily soiled surfaces. Do not rinse the remaining moist layer with clean water. In case of heavy contamination it is advisable to first use Lithofin MN Dirt Remover. Lithofin Dirt Remover is specially designed for thoroughly cleaning used floors with severe general contamination, greasy contamination, residues of floor care products, gloss layers and more. For removing construction dirt from new floors, especially from polished marble and limestone.
With Lithofin Wash & Clean you can regularly mop natural stone floors. A tip for use on polished marble is to use Lithofin MN Wash & Clean 3 to 4 times and then Lithofin MN Gloss & Clean 1 time when mopping. Then the marble floor will look more and more beautiful and the shine will be retained.
On which stone can I use Lithofin MN Wash & Clean?
All natural stone types such as Bianco Carrara, Travertine, Solnhofen natural stone, Jura marble, Porphyry, Serizzo and Sandstone. This product can also be used on concrete. The surfaces of the stone may be polished, ground or rough as a finish, impregnated, sealed or untreated. Lithofin MN Wash&Clean has the advantage that it strengthens and supports the effect of Lithofin MN Stain Stop, Lithofin Stain Stop W and Lithofin Stain Stop Plus impregnated surfaces.
Documents
